|
Block 1 (Style) |
| HS - Hollow Shaft |
|
Block 3 (NO. OF VANES) |
1V - Single Vane |
2V - Double Vane |
|
Block 4 (MOUNTING) |
E- End |
| E/B- End/Base |
|
Block 5 (SEALS) |
B- Buna "N" Standard Shaft |
V - Viton Standard shaft seal |
E - Ethylene propylene |
| Z - Special |
** “End ports” for HS Series means on non-mounting end, parallel to shaft. Not available on 2V units. |
|
|
Block 6 (SHAFT CONFIGURATION) |
A - Standard (Internal Key for HS) |
M - Internal Spline |
Z - Special |
|
Block 7 (SHAFT MODIFICATION) |
A - Standard (None) |
| Z - Special |
|
Block 8 (PORTING) |
1 - N.P.T. |
2 - SAE Straight threads standard |
| **5 - End ports — N.P.T. |
| **6 - End ports — SAE |
| 7 - Manifold ports (See manifold porting data for explanation) |
| 0 - BSPP straight threads |
| Z - Special |
|
